Skip to main content

Build Guide Overview

The following is a detailed instruction manual to completely reconstruct a Rover if necessary. Each step in the guide represents a small number of actions required to build the Rover.

Build Instructions Overview

Hugo van Wezenbeek

Hugo van Wezenbeek

Hardware Engineer

Tools​

To build the Rover you need the following tools:

  • A screwdriver with an M3 and M2.5 bit or equivalent hex keys
  • Pliers

Format​

The guide shows each step that requires a screwdriver with an orange circle. These are structured in a consistent format:

  • Screws: 4x M3x6
    • Meaning: 4 M3 screws of length 6mm
  • Nuts: 4x M3
    • Meaning: 4 M3 nuts
  • Offsets: 12x M3x40 offsets
    • Meaning: 12 M3 (brass) offsets of length 40mm

Download​

In case you do not want to follow the build guide online, you can download all the drawings from the build guide as a PDF here.